The prototype Auto workshop uses a hydraulic jack, the hydraulic jack uses hydraulic power which lifts vehicles so that maintenance can be performed.The hydraulic jack uses a fluid, which is incompressible, that is forced into a cylinder by a pump plunger.Oil was used since it is self lubricating and stable. When the plunger pulls back, it draws oil out of the reservoir through a suction check valve into the pump chamber. When the plunger moves forward, it pushes the oil through a discharge check valve into the cylinder. The suction valve ball is within the chamber and opens with each draw of the plunger. The discharge valve ball is outside the chamber and opens when the oil is pushed into the cylinder. At this point the suction ball within the chamber is forced shut and oil pressure builds in the cylinder.
